PP Pleated Air Filter Cartridge For Food Beverage Air Prefiltration
5μm 10"
Description of Food & Beverage Air Prefiltration
WECHANGE PP membrane filters are high efficiency depth type filters
constructed entirely of chemically resistant polypropylene. They
are economical, premium quality products that deliver consistently
high filtration efficiency, superior flow rates, substantial dirt
holding capacity, and exceptionally long service life.
All-polypropylene construction makes it a cost-effective choice for
clarification and prefiltration applications.
WECHANGE PP membrane filters are ideal for clarification,
polishing, bioburden reduction and prefiltration applications. It
is compatible with a wide range of chemicals and cleaning agents.
Application of Food & Beverage Air Prefiltration
- Filtration of pharmaceutical and biological product and process
liquids;
- Filtration of cosmetics and personal care product liquids;
- Filtration of microelectronic chemicals, solvents, UPW and CMP
slurries;
- Filtration of wine, beer, mineral water, soft drinks and other
beverages;
- Filtration of water purification systems;
- Filtration of chemical process.
Features of Food & Beverage Air Prefiltration
- Absolute liquid ratings from 1 µm to 10 µm;
- Self-bonded, non-fiber-releasing filter media;
- All-polypropylene construction;
- High flow rates;
- High dirt holding capacity;
- Wide chemical compatibility;
- 100,000-level clean room manufactured;
- 100% integrity test for every filter cartridge before delivery.
Operating Characteristic of Food & Beverage Air Prefiltration
| Outer Diameter | 2.7”/69mm |
| Length | 10”/254mm 20”/508mm 30”/762mm 40”/1016mm 60”/1524mm |
| Pore Size | 1, 3, 5, 7, 10μm |
| Max. Operation Temperature | 80℃ |
| Max. Operation Pressure | Forward direction: 0.58 MPa(25±2℃) 0.24MPa(80±2℃) *It not recommend for reverse use |
| Food Contactability | All ingredients are compliant GB 4806.7-2016 |
| Filtration Areas | 5”≥0.34m²; 10”≥0.68m²; 20”≥1.36m² 30”≥2.04m²; 40”≥2.72m² |
| Integrity Testing | Bubble point≥60KPa 50KPa pressure, diffusion flow＜10 ml/min Anhydrous ethanol was used as the wetting solution at 25°C, and
compressed air was used to test the bubble point values against the
diffusion flows. |
| Sterilization | 30 times (121.4℃,30 min offline high-pressure steam sterilization) |
| Bacterial Retention Capacity | Minimum retention rate 107 CFU/cm2 The product was tested against Serratia marcescens (ATCC14756) using ASTM F838 method. |
| Extractable Substance | ＜50 mg/m2 After high-pressure steam sterilization(121.4℃,60 min), 25℃±2℃
immersing in pure water for 24h |
| Biosafety | The endotoxin level＜0.25 EU/ml, and the extraction solution has no
acute toxicity |
| Cleanliness | No fibers or other visible foreign objects were detected in the
filtered liquid. *Lamp test according to the Chinese Pharmacopoeia 2020 edition
<0904> |
| Filtration direction | Outside-inside |
Flow Rate of Food & Beverage Air Prefiltration
Material of Structure of Food & Beverage Air Prefiltration
| Filter Media | Polypropylene |
| Deflector Layer | Polypropylene |
| Enclosures/Ports | High Temperature Resistance Polypropylene |
| Adapter | Polypropylene |
| Seals | Silicone/EPDM |
Naming Regulations of Food & Beverage Air Prefiltration
| WF | PL | P | 0500 | 10 | A | S |
| Trademark | Form | Filtration Materials | Accuracy | length | Adapter | O ring |
| WECHANFIB | PLEATED | P PP | 0100 1um | 5 5” | A 222/ FIN | S Silicone |
| | | 0300 3um | 10 10” | B 222/Flat | E EPDM |
| | | 0500 5um | 20 20” | C 226/ FIN | V FKM |
| | | 0700 7um | 30 30” | D 226/ Flat | T PTFE |
| | | 1000 10um | 40 40” | E DOE | |
| Wechange Pleated Filter Cartridge Products List |
| Membrane Material | Type No. | Application | Pore Size | Diameter | Length | Adaptor |
| μm | mm | inch |
| PP | WF-PL-P-0100-05-* | Liquid Clarification, Liquid Filtration, Sewage Filtration,
Security Filtration,
Clarification Filtration, Beverage Pre Filtration, Microelectronic
Liquid Pre Filtration, Photoresists Prefiltration, Organic Solvents
Pre Filtration, Air Prefiltration. | 1 | 69 | 5" | The "*" Indicate type of CONNECTOR and SEAL RING, they're customizable and have below option codes:
1,Connector:
A 222/Fin
B 222/Flat End Cap
C 226/Fin
D 226/Flat End Cap
E DOE
2,Sealing Ring:
S Silicone
E EDPM(Ethylene
Propylene Diene
Monomer)
V FKM (Fluororubber)
T PTFE(Polytetra-
fluoroethylene) |
| PP | WF-PL-P-0100-10-* | 1 | 69 | 10" |
| PP | WF-PL-P-0100-20-* | 1 | 69 | 20" |
| PP | WF-PL-P-0100-30-* | 1 | 69 | 30" |
| PP | WF-PL-P-0100-40-* | 1 | 69 | 40" |
| PP | WF-PL-P-0300-05-* | 3 | 69 | 5" |
| PP | WF-PL-P-0300-10-* | 3 | 69 | 10" |
| PP | WF-PL-P-0300-20-* | 3 | 69 | 20" |
| PP | WF-PL-P-0300-30-* | 3 | 69 | 30" |
| PP | WF-PL-P-0300-40-* | 3 | 69 | 40" |
| PP | WF-PL-P-0500-05-* | 5 | 69 | 5" |
| PP | WF-PL-P-0500-10-* | 5 | 69 | 10" |
| PP | WF-PL-P-0500-20-* | 5 | 69 | 20" |
| PP | WF-PL-P-0500-30-* | 5 | 69 | 30" |
| PP | WF-PL-P-0500-40-* | 5 | 69 | 40" |
| PP | WF-PL-P-0700-05-* | 7 | 69 | 5" |
| PP | WF-PL-P-0700-10-* | 7 | 69 | 10" |
| PP | WF-PL-P-0700-20-* | 7 | 69 | 20" |
| PP | WF-PL-P-0700-30-* | 7 | 69 | 30" |
| PP | WF-PL-P-0700-40-* | 7 | 69 | 40" |
| PP | WF-PL-P-1000-05-* | 10 | 69 | 5" |
| PP | WF-PL-P-1000-10-* | 10 | 69 | 10" |
| PP | WF-PL-P-1000-20-* | 10 | 69 | 20" |
| PP | WF-PL-P-1000-30-* | 10 | 69 | 30" |
| PP | WF-PL-P-1000-40-* | 10 | 69 | 40" |
PP Pleated Filter Cartridge for Food & Beverage Air Prefiltration
5μm/10"
General Description of Food & Beverage Air Prefiltration:
PP pleated filters are high-quality filtration products designed to
meet the needs of various industries. With its innovative design
and use of top-of-the-line materials, the filter is sure to deliver
efficient and reliable performance in any application.
The end cap of this filter is made of durable polypropylene, a
thermoplastic polymer known for its high chemical resistance and
excellent mechanical strength. This allows the filter to withstand
high pressures and high flow rates, ensuring long-lasting and
effective filtration performance, making it ideal for use under
harsh operating conditions.
The PP pleated filter is equipped with top-of-the-line seals to
ensure leak-free operation and maximum protection against fluid
bypass. These seals are carefully selected and designed to meet the
specific requirements of each filtration application
PP pleated filters are available in a variety of micron scales,
giving you the flexibility to choose the most appropriate
filtration level for your specific needs.
Application of Food & Beverage Air Prefiltration :
1.For food and beverage air pre-filtration
Features and Benefits of Food & Beverage Air Prefiltration:
* The production environment is a 100,000-level dust-free clean
workshop;
* Broad chemical compatibility, resistant to all kinds of acids,
alkalis and organic solvents;
* The graded pore size of polypropylene fiber depth filter media is
smaller along the direction of fluid movement, which can intercept
particles of different sizes, and has excellent dirt-holding
capacity and low flow resistance;
* Easy to install, saving, less filter element replacement, help
customers save labor costs;
* Strict quality control system, complete production process flow;
* Short delivery period;
* Flexible payment method: T/T, L/C, West Union, Paypal;
* Free technical support;
Performance Specifications of Food & Beverage Air Prefiltration:
Dimensions(nominal):
| OD | 69mm |
| Length | 10"(254mm),20"(508mm),30"(762mm) |
Material of Construction:
| Filter Media | Deflector layer | port | Enclosures/Ports | Seals Material |
| Polypropylene | Polypropylene | Polypropylene | Polypropylene | Silastic/EPDM |
Beer Clarification Filter Cartridge Performance:
| Maximum operation temperature | 80℃ |
| Maximum operation pressure | Forward direction :0.5 MPa(25±2℃) 0.24MPa(80±2℃) It not recommend for reverse use |
| Filtration areas | ≥1.36m²/ 20 inch |
| Sterilization | 30 times(121.4℃,30 min offline high-pressure steam sterilization) |
| Extractable substance | ＜50 mg/m2 After high-pressure steam sterilization(121.4℃,60 min),25℃±2℃
immersing in pure water for 24h |
| Biosafety | The endotoxin level＜0.25 EU/ml, and the extraction solution has no
acute toxicity |
| Cleanliness | No fibers or other visible foreign objects were detected in the
filtered liquid |
